Aikon AK32 Flytower Mini Stack

SPECIFICATION:

1. AIKON AK32PIN 4-IN-1 35A 6S BLHELI_32 ESC

•  BLHeli_32 code base
• Programmable PWM frequency of up to 48KHz
• Auto-timing for higher efficiency and reliability
• Analog Voltage/Current sensing
• Adjustable “Brake on Stop” force
• Improve direction change in Bidirectional mode
• One current sensor to measure the total amp draw and telemetry functions.
• ESC Telemetry (Voltage and RPMs and current)
• Configuring from FC using DShot commands
• Programmable sine modulation mode
• Programmable soft bidirectional mode
• Programmable autonomous periodic (every 32ms) telemetry mode
• Hardware noise filter on the signal input

Includes

• 1x AK32PIN ESC
• 1x XT30 Pigtail
• 4x Mounting Gummies
• 1x 8pin Harness
• 1x 25v 330uf Capacitor
• 1x PANASONIC FM Series 1000UF 35V LOW ESR CAPACITOR

2. AIKON F4 MINI 20x20 FC w/ OSD

The Aikon F4 Mini 20x20 Flight Controller is a new generation flight controller that was designed to be compatible with the Aikon AK32PIN 4-in-1s. All of the best features have been packed into one seamless flight experience. We know you will love it!

Features

• Conveniently located ESC signal ground and telemetry pads
• Quick connection cable for 4-in-1 ESCs,
  • Works out of the box with the Aikon AK32PIN 4-in-1s
• On-board voltage regulator up to 6S
• 32khz Capable
• 168mhz F4 Processor
• Software serial:SOFTSERIAL1 for VTX control
• Onboard OSD and Blackbox
• LED outputs

Specifications

• Battery: 2-6s
• Mounting Holes: 20*20mm
• Firmware: Betaflight AIKONF4 Target
• MCU: STM32F405
• IMU: ICM-20602
• Blackbox: SPI 16MB
• Weight: 7g
• Hardware UARTS:
  • UART1 for SerialRX
  • UART3 for S.PORT
  • UART4 for ESC telemetry
  • UART2 available for CRSF or general use

Included

• Aikon F4 Mini 2020 FC
• 4x Red Grommets/Gummies
• 1x Silicone 8pin cable with bare leads
• 1x Silicone 8pin cable with connectors for 4-in-1
• Paper Manual