Happymodel Mobula7

Sale price BND$150.00 Regular price BND$193.00

Features

  • New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
  • Betaflight support, multi-flight mode: ACRO/AIR/ANGLE
  • New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
  • Betaflight OSD support, easy to get RSSI, Voltage, current from your goggles (DSM* version no RSSI output)
  • SmartAudio ready, change VTX bands, channels via OSD
  • Adjust the settings and the PID of the flight controller via OSD
  • Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
  • DSM2/DSM* version support DSM2 and DSM* compatible Spektrum transmitter
  • Full telemetry function ready
  • Head lights ready
  • Camera angle adjustable
  • Real Bind and Fly version
  • Buzzer Ready

Specifications

Drone

  • Wheelbase: 75mm
  • Size: 98mm*98mm*36mm
  • Weight: 25.9g (without battery)
  • Weight:40g (with Original 250mah lipo battery x2 )

Crazybee F3 Pro Flight Controller Item Name: Crazybee F3 Pro FC

  • MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1-2S battery input (DC 3.5-8.7V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Receiver ( Different version having a different receiver)
  • Built-in Betaflight OSD(SPI Control)
  • Built-in Current meter Max 28A
  • Current meter scale set to 1175
  • Built-in 5V 1A BEC with LC filter
  • Built-in voltage detection
  • BLHELI_S pass-through Ready
  • Heading LED Ready

Firmware

  • (Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
  • (Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS

Onboard 5A 4 In 1 ESC

  • Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
  • MCU upgraded to EFM8BB21
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: S_H_50_REV16_7
  • Default protocol: DSHOT600

Onboard Frsky US Receiver Version

  • SPI BUS receiver
  • Frsky D8/D16 switchable
  • Compatible Non-EU transmitter both D8 and D16 mode
  • Channels: 8ch or 16ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m

SE0802 16000KV Motor

  • Model: SE0802
  • KV: 16000KV
  • Configuration: 9N12P
  • Stator Diameter: 8mm
  • Stator Length: 2mm
  • Shaft Diameter: F1.0
  • Motor Dimension (Dia.*Len) : F10.5*14.5mm
  • Weight: 1.8g
  • Support 1-2S Lipo

Propeller

  • 40mm 4-blade Propeller ( 4 CW + 4 CCW)

5.8G VTX AIO Camera

  • 5.8G 40CH 25mW VTX
  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)

700TVL FOV120 Camera

  • Camera resolution: 700TVL
  • Field of view: 120°
  • Video Format: NTSC
  • Antenna: RG178 antenna
  • Frequency: 5.8GHz 5bands 40 channels
  • With Raceband
  • SmartAudio ready (Frsky EU-LBT and DSMX version not compatible)
  • Size: 13.9"12.0mm ( L*W )
  • Weight: 3g

Lipo Battery

  • Capacity:250mAh
  • Voltage:3.8v
  • Continuous Discharge Rate: 30C
  • Instantaneous discharge rate: 60C
  • Size: 55mmx12mmx7mm
  • Weight: 6.5g
  • Connector: PH2.0
  • Notes: Need 2pcs batteries for Series circuit

Includes

Basic Version

  • 1x Mobula7 75mm FPV Drone
  • 4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
  • 4x 3.8v 250mah 30C/60C Lipo battery
  • 1x USB Lipo/LIHV Charger
  • 1x Fixing Mount for Lipo Battery
  • 1x Propeller Disassemble Tool
  • 1x Screwdriver