Features
- New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
- Betaflight support, multi-flight mode: ACRO/AIR/ANGLE
- New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
- Betaflight OSD support, easy to get RSSI, Voltage, current from your goggles (DSM* version no RSSI output)
- SmartAudio ready, change VTX bands, channels via OSD
- Adjust the settings and the PID of the flight controller via OSD
- Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
- DSM2/DSM* version support DSM2 and DSM* compatible Spektrum transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version
- Buzzer Ready
Specifications
Drone
- Wheelbase: 75mm
- Size: 98mm*98mm*36mm
- Weight: 25.9g (without battery)
- Weight:40g (with Original 250mah lipo battery x2 )
Crazybee F3 Pro Flight Controller Item Name: Crazybee F3 Pro FC
- MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
- Sensor: MPU-6000(SPI connection)
- Board size: 28.5 * 28.5MM
- Power supply: 1-2S battery input (DC 3.5-8.7V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Receiver ( Different version having a different receiver)
- Built-in Betaflight OSD(SPI Control)
- Built-in Current meter Max 28A
- Current meter scale set to 1175
- Built-in 5V 1A BEC with LC filter
- Built-in voltage detection
- BLHELI_S pass-through Ready
- Heading LED Ready
Firmware
- (Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
- (Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
Onboard 5A 4 In 1 ESC
- Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
- MCU upgraded to EFM8BB21
- Current: 5A continuous peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: S_H_50_REV16_7
- Default protocol: DSHOT600
Onboard Frsky US Receiver Version
- SPI BUS receiver
- Frsky D8/D16 switchable
- Compatible Non-EU transmitter both D8 and D16 mode
- Channels: 8ch or 16ch
- Failsafe support
- No ground interference ( Transmitter and receiver 1 m from the ground): 300m
SE0802 16000KV Motor
- Model: SE0802
- KV: 16000KV
- Configuration: 9N12P
- Stator Diameter: 8mm
- Stator Length: 2mm
- Shaft Diameter: F1.0
- Motor Dimension (Dia.*Len) : F10.5*14.5mm
- Weight: 1.8g
- Support 1-2S Lipo
Propeller
- 40mm 4-blade Propeller ( 4 CW + 4 CCW)
5.8G VTX AIO Camera
- 5.8G 40CH 25mW VTX
- Output power: 25mw
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA(type)
700TVL FOV120 Camera
- Camera resolution: 700TVL
- Field of view: 120°
- Video Format: NTSC
- Antenna: RG178 antenna
- Frequency: 5.8GHz 5bands 40 channels
- With Raceband
- SmartAudio ready (Frsky EU-LBT and DSMX version not compatible)
- Size: 13.9"12.0mm ( L*W )
- Weight: 3g
Lipo Battery
- Capacity:250mAh
- Voltage:3.8v
- Continuous Discharge Rate: 30C
- Instantaneous discharge rate: 60C
- Size: 55mmx12mmx7mm
- Weight: 6.5g
- Connector: PH2.0
- Notes: Need 2pcs batteries for Series circuit
Includes
Basic Version
- 1x Mobula7 75mm FPV Drone
- 4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
- 4x 3.8v 250mah 30C/60C Lipo battery
- 1x USB Lipo/LIHV Charger
- 1x Fixing Mount for Lipo Battery
- 1x Propeller Disassemble Tool
- 1x Screwdriver