Hobbywing XRotor G3 Combo F4 Flight Controller & 60A 4-in-1 ESC
Now bundled with the latest 60A ESC!
This is the Flight Controller and ESC stack of choice for many of the leading FPV Pilots in the world, including Minchan Kim, Milk FPV, Gapit FPV, Banni UK; just to name a few. And for good reason, it was designed for intense competition. This stack is built with premium components that won't let you down on race day.
This stack features the best specs for today's racer such as DShot1200, BLHeli32, onboard SD slot, STM32405, ICM20602, and onboard filter circuit for your VTX.
The built-in OSD on the FC allows the user to adjust or set OSD parameters from your flight firmware such as Betaflight/Cleanflight/Butterflight etc.
FEATURES
-
Flight Controller
- Fully shock absorbing
- On-board circuit filter
- Support up to DShot1200
- Supports Betaflight, Butterflight, iNav & Cleanflight
- Betaflight OSD
-
60A ESC
- Built-in BEC: 5V@0.6A
- 6S Capable
- 60A 32bit supporting DShot1200
- Current sensor
- Top quality MOSFETs
- Fully shock absorbing
SPECIFICATIONS
-
Flight Controller
- Programming via: Betaflight/Cleanflight-configurator or Others
- Compatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200, Proshot1000 and etc.
- Compatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL, and etc.
- OSD: Built-in
- Voltage Monitoring: Supported
- Current Monitoring: Supported
- External Buzzer: Supported
- LED Control: Supported
- BEC: No
- USB Port: MicroUSB
- Size: 36*36mm
- Weight: 6g
-
60A ESC
- LiPo Power input: 3S-6S
- Cont.Current: 60Ax4
- Burst Current: 80Ax4
- BEC Output: 5V@0.6A
- Input wires: 12AWG-130mm* (Red/Black)
- Output Wire: No wires but solder tabs
- Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
- Weight: 15g
- Mounting holes: 30.5x30.5mm
- ESC Programming: BLHeliSuite32
- Timing: Supported
- Motor Rotation: Supported
DOWNLOADS
PACKAGE CONTENTS
- 1x F4 G3 FC
- 1x 60A 4-in-1 ESC
- 1x Signal Cable
- Soft Mount Grommets